You are currently viewing PREPARING YOUR TRAILER FOR WINTER
Preparing Your Trailer for Winter Use or Storage

PREPARING YOUR TRAILER FOR WINTER

Tips from Jeff the Trailer Dude | Valder’s Vehicles | Hinckley, Minnesota

Preparing your trailer for winter starts with deciding how you will use it. Will it haul equipment through the cold months, carry snowmobiles on weekend trips, or stay parked until spring? Each situation calls for attention before temperatures drop.

At Valder’s Vehicles in Hinckley, Minnesota, we help trailer owners prepare for work and recreation throughout the year. Use this winter trailer preparation checklist alongside the instructions for your specific trailer and its components.

Start With a Clean Trailer

Remove leftover cargo, loose debris, and wet items. Sweep the deck or enclosed interior so you can see the condition of the flooring and tie-down points.

Wash with products approved for your trailer’s finish and materials. Allow the trailer to drain and dry before covering or storing it. Choose washing conditions that will not leave you with frozen latches or an icy work area.

Inspect Before Winter Use

  • Floor and frame: Look for damaged decking, cracked welds, loose fasteners, or other visible damage.
  • Tires: Inspect tread and sidewalls, check cold inflation pressure against the trailer manufacturer’s specifications, and include the spare.
  • Coupler and safety chains: Check operation, wear, attachment points, and required retainers.
  • Lights and wiring: Verify equipped lights and inspect accessible wiring and connectors.
  • Ramps and doors: Check hinges, latches, seals, and secure operation.
  • Tie-down equipment: Inspect anchors, straps, chains, and hardware before loading.

Have structural damage or questionable components evaluated before towing. Do not force a frozen latch or use damaged loading equipment.

Review Brake and Bearing Maintenance

Check your service records rather than assuming the running gear is ready because the trailer was used recently. Follow the brake, axle, and hub manufacturers’ inspection and maintenance schedules.

Different hub systems require different procedures. A grease fitting does not automatically eliminate other inspection or service requirements. Use the specified lubricant and avoid mixing incompatible grease types.

If you notice unusual noise, wheel looseness, leakage, or changes in braking, arrange service before the next trip.

Prepare Batteries for Their Winter Job

If your trailer has a breakaway battery, hydraulic-system battery, or other onboard battery, identify its type and follow its manufacturer’s charging, storage, and temperature instructions.

Use a compatible charger or maintainer only as directed. Do not assume that every battery should remain connected to a charger throughout storage. Before towing, reconnect any disconnected equipment and complete the prescribed brake and breakaway-system checks.

If Your Trailer Will Be Stored

Choose a firm, well-drained location. Chock the wheels and support the trailer according to its manufacturer’s instructions. Secure doors and ramps, protect electrical connectors, and follow any recommended ventilation or cover requirements.

Check the trailer periodically during storage, particularly after storms or significant temperature changes. Look for moisture, damage, and anything that needs attention before the trailer returns to service.

If Your Trailer Will Keep Working

Continue your pre-trip checks throughout winter. Keep lights visible and loading surfaces clear of snow and ice. Inspect the trailer between trips and address problems before the next haul.

Jeff’s tip: Make a short repair list now. Whether you haul all winter or park until spring, knowing what needs attention makes planning easier.

Get Help Preparing Your Trailer

Request trailer maintenance at Valder’s Vehicles. Aluma owners can also browse our Aluma trailer parts and accessories.

For component-specific information, see Dexter’s bearing maintenance guidance and the manuals supplied with your trailer.

If you have questions, please call us at 763.689.8778. Visit Valder’s Vehicles online or stop by in Hinckley, Minnesota.

Leave a Reply