Aluma Trailer Salt Shields, Rock Guards and Rack Kits
Find Aluma trailer salt shields, front rock guards, solid rear racks, and tilt rear gates at Valder’s Vehicles in Hinckley, Minnesota. Browse part numbers and model fitment for Aluma utility and tilt trailers.
Aluma Rock Guard, Salt Shield and Rack Part Numbers
Select a part number below to request pricing or check availability. The listed fitment identifies the Aluma trailer model or series associated with each component.
| Part Number | Fits Aluma Model |
|---|---|
| 12″ Front Rock Guard Kits | |
| 40-0000377 | 486 |
| 40-0000296 | 54’s |
| 40-0000176 | 63’s |
| 40-0000209 | 72’s |
| 40-0000154 | 77’s |
| 40-0000023 | 81’s |
| 40-0000061 | 78’s |
| 24″ Front Rock Guard Kits with 12″ Sides | |
| 20-0001254 | 486 |
| 20-0001255 | 548 |
| 20-0001256 | 5410 |
| 20-0001257 | 638 |
| 20-0001258 | 6310 |
| 20-0001436 | 6812 |
| 20-0001259 | 7210 |
| 20-0001940 | 7710 |
| 20-0001931 | 7712 |
| 20-0001949 | 7814 |
| 24″ Solid Rear Rack for 24″ Solid Side Rack Kits | |
| 40-0001766 | 486 |
| 40-0000297 | 54’s |
| 20-0000092 | 63’s |
| 40-0000071 | 68’s |
| 40-0000119 | 72’s |
| 20-0000122 | 7212HSLR |
| 40-0000170 | 77’/78’s |
| 40-0001768 | 82’s |
| Tilt Rear Gates | |
| 40-0000096 | 68 Tilt |
| 40-0001258 | 77 Tilt |
Have your trailer model, VIN, series, width, existing part number, mounting measurements, and photos available when possible.
Contact Valder’s to OrderProtection and Rack Accessories for Aluma Trailers
Aluma front rock guards and salt shields help protect cargo and the forward portion of an open trailer from stones, road debris, salt, slush, and spray produced by the tow vehicle. Different heights and side-panel configurations are available for supported trailer models.
Solid rear racks can complement compatible side-rack packages and increase containment for landscaping material, brush, firewood, and other appropriate cargo. Tilt rear gates provide a model-specific rear component for select Aluma tilt trailers.
12-Inch Rock Guards
Model-specific 12-inch front rock guard kits are listed for several Aluma utility trailer widths and series.
24-Inch Salt Shields
Taller 24-inch front rock guards with 12-inch sides provide additional forward and side coverage for supported models.
Rear Racks and Tilt Gates
Browse solid rear racks for compatible side-rack kits and replacement rear gates for select Aluma tilt trailers.
How to Confirm Aluma Accessory Fitment
These fitment sections are permanently expanded. Do not order based on trailer width or appearance alone.
Trailer Identification
- Complete Aluma trailer VIN
- Trailer model and series
- Model year when available
- Deck width and length
Accessory Configuration
- 12-inch or 24-inch front guard
- Side-panel height and length
- Rear-rack or tilt-gate application
- Existing side-rack configuration
Mounting Information
- Existing part number when available
- Mounting-hole measurements
- Photos of the trailer and mounting area
- Photos of existing guards or racks
Aluma Rock Guard, Salt Shield and Rack Options
12-Inch Front Rock Guard Kits
Twelve-inch front rock guards provide model-specific coverage across the front of compatible Aluma utility trailers. Kits are listed for select 486, 54-, 63-, 72-, 77-, 78-, and 81-series models.
24-Inch Front Guards with Sides
These kits combine a 24-inch front section with 12-inch side sections. Fitments include several compact and full-width Aluma utility trailer models.
24-Inch Solid Rear Racks
Solid rear racks are designed for use with compatible 24-inch solid side-rack kits. Confirm the trailer series and existing side-rack package before ordering.
Aluma Tilt Rear Gates
Replacement tilt rear gates are listed for supported 68 Tilt and 77 Tilt trailer applications. Verify the complete trailer model, VIN, dimensions, and mounting configuration.
Benefits of a Trailer Rock Guard
A front rock guard creates a barrier between the tow vehicle and cargo carried near the front of an open trailer. It can help limit direct exposure to common roadway debris.
- Helps deflect gravel and road debris
- Provides additional forward cargo protection
- Helps limit road spray reaching cargo
- Provides model-specific aluminum construction
- Available in multiple coverage heights
Inspect Guards, Racks and Gates
Inspect all mounting points before loading or towing. Repair or replace components that are loose, cracked, bent, or unable to remain securely attached.
- Loose or missing mounting hardware
- Cracks near welds or mounting points
- Bent guard, rack, or gate sections
- Sharp edges caused by damage
- Gate latches that do not engage securely
Aluma Rock Guard and Rack Installation
Need help installing a salt shield, rock guard, rack, or rear gate? Valder’s Vehicles provides trailer service and accessory installation in Hinckley, MN. Our service department can also assist with routine maintenance, wiring, lighting, brakes, wheel bearings, and other trailer repairs.
Order Aluma Rock Guards and Rack Kits in Hinckley, MN
Valder’s Vehicles helps Aluma trailer owners locate front rock guards, salt shields, rear-rack kits, and tilt rear gates for supported models.
We are located in Hinckley, Minnesota, approximately one hour north of the Twin Cities and one hour south of Duluth. Our dealership is one block east of Tobies Restaurant and easily accessible from Interstate 35.
Browse more Aluma replacement parts and components , view available Aluma trailers , or contact our team for model-fitment assistance.
Aluma Rock Guard and Salt Shield FAQs
What is the difference between the 12-inch and 24-inch rock guards?
The 12-inch kits provide a shorter front barrier. The 24-inch kits listed here have a taller front section and 12-inch side sections for additional coverage.
How do I identify the correct rock guard for my Aluma trailer?
Provide the trailer model, VIN, year, deck width, existing accessory configuration, mounting measurements, and photos of the trailer.
Can a solid rear rack be installed without side racks?
The rear racks listed on this page are identified for use with compatible 24-inch solid side-rack kits. Confirm the complete rack configuration before ordering.
Are Aluma tilt rear gates interchangeable?
Not necessarily. Tilt-gate dimensions and mounting configurations can vary. Match the gate to the trailer model, VIN, and existing mounting system.
Does Valder’s Vehicles install Aluma rock guards and racks?
Contact the Valder’s Vehicles service department to discuss current installation, inspection, repair, and accessory-service options.
Need an Aluma Salt Shield, Rock Guard or Rack?
Select a part number above or contact Valder’s Vehicles with your trailer model and VIN. Our team can help confirm fitment and check current pricing and availability.